Wisdom WinGROUP CO., LIMITED
Get Quote
Home/ Forklift/ X Series 2.5-3.0 Ton High-Performance Two-Wheel Drive Internal Combustion Rough Terrain Forklift
Forklift

X Series 2.5-3.0 Ton High-Performance Two-Wheel Drive Internal Combustion Rough Terrain Forklift

CPCD25/CPCD30: 58% gradeability, locking differential, 24/26 km/h. Standard units ship in 15-25 days.

X Series 2.5-3.0 Ton Two-Wheel Drive Internal Combustion Rough Terrain Forklift — CPCD25 and CPCD30, both running the X2G72E-RT2 full-floating hydraulic gearbox. The drive axle carries a locking differential, reinforced brakes and bearings, and a reinforced steering axle assembly. Wide-base deep-tread tires sit on the ground where standard treads dig in. Load-sensing hydraulic steering draws only what the steer axle needs. Measured figures: 58% gradeability on CPCD25 loaded, 24/26 km/h travel speed, 2850 mm turning radius. CE/EPA/ISO documents ready for customs, Toyota/Heli parts cross-reference within 24 hours, OEM color from 3 units.

Request a Quote View Specs
#379 · SKU
X Series 2.5-3.0 Ton High-Performance Two-Wheel Drive Internal Combustion Rough Terrain Forklift
Drivetrain

X2G72E-RT2 Gearbox and Locking Differential, Listed Part by Part

You get the component list, not a brochure sentence.

Gradeability measured loaded and unloaded

CPCD25 at 58%/55%, CPCD30 at 52%/46% — test curves available as PDF

X2G72E-RT2

full-floating hydraulic gearbox and locking differential listed by part, so you can compare against any standard model line by line

Tire matching table for mud, gravel, quarry and construction ground

pick the tread before you order, not after

Match the Tread to Your Ground Before You Order
Feature

Match the Tread to Your Ground Before You Order

Mud, gravel, quarry, construction — each gets a different answer.

A wide-base deep-tread tire is not one product; it is a family. We publish a matching table that pairs tread pattern and tire size to ground type: soft mud, crushed gravel, quarry rock, packed construction site. Wide-base construction spreads load and lifts flotation on soft soil; the deeper tread and reinforced sidewall resist cuts from stone. Read the table, pick the configuration, and you avoid the usual first-year problem — a tire that was right for the dealer's yard and wrong for your site.

Where It Works
Feature

Where It Works

  • Construction sites with uneven, unpaved ground
  • Mining and quarry work on muddy or rocky terrain
  • Port and warehouse yards with gravel surfaces
  • Agriculture and forestry loading on soft soil
  • Rental fleets that need rough ground capability without a specialist operator
Measured Performance

Gradeability and Speed, CPCD25 Against CPCD30

Tested loaded and unloaded, not estimated.

CPCD25: 58% gradeability loaded, 55% unloaded, 24/26 km/h travel speed. CPCD30: 52% loaded, 46% unloaded, same 24/26 km/h. Max lift speed loaded is 620/640 mm/s on CPCD25 and 490/510 mm/s on CPCD30. These are standardized test figures — request the performance PDF and put them next to any competing curve before you decide.

Component Comparison

What Changes Against a Standard Rough Terrain Model

Five components, side by side.

OUR OFFER

This Product

ComponentX Series (CPCD25/CPCD30)Standard Model
TransmissionX2G72E-RT2 full-floating hydraulic gearboxConventional gearbox
DifferentialLocking function, engaged on demandOpen differential
SteeringLoad-sensing hydraulic steeringConstant-flow steering
TiresWide-base deep-tread pneumaticStandard tread pneumatic
Brakes and bearingsReinforcedStandard

Generic Market Alternatives

  • Unknown material source & batch inconsistency
  • No compatibility verification for your machine model
  • Lead times stretch 3-8 weeks with no clear status updates
  • Weak or non-existent post-sales engineering support
Technical Specifications

CPCD25 and CPCD30, Key Parameters

The figures most buyers check first.

Model
CPCD25 / CPCD30
Transmission
X2G72E-RT2 full-floating hydraulic gearbox
Rated load
2500 kg / 3000 kg
Load center distance
500 mm
Standard lift height
3000 mm
Free lift height
140 mm / 150 mm
Mast tilt angle
10/12°
Minimum turning radius
2850 mm
Maximum travel speed (loaded/unloaded)
24/26 km/h
Maximum lift speed (loaded)
620/640 mm/s (CPCD25) / 490/510 mm/s (CPCD30)
Maximum gradeability (loaded/unloaded)
58% / 55% (CPCD25) / 52% / 46% (CPCD30)
Length (without forks)
3125 mm / 3140 mm
Tire type
Wide-base deep-tread pneumatic
Drive type
Two-wheel drive
Where They Work

Construction, Quarry, Port Yard, Farm Loading

Ground conditions that stop a standard counterbalance truck.

X Series 2.5-3.0 Ton High-Performance Two-Wheel Drive Internal Combustion Rough Terrain Forklift gallery
X Series 2.5-3.0 Ton High-Performance Two-Wheel Drive Internal Combustion Rough Terrain Forklift gallery
Procurement Questions

Lead Time, Parts Compatibility, Certifications, OEM

The four things buyers ask before a PO.

Lead Time, Parts Compatibility, Certifications, OEM

Lead time: 15-25 days standard; OEM color adds 5-7 days after a 7-10 day sample.
Parts: Toyota/Heli cross-reference within 24 hours of your part numbers.
Certifications: CE, EPA, ISO 9001 documents downloadable, declaration of conformity included.
OEM: 3 units for color, 5 for mast or attachment changes.
Loading: two units per 40HQ, diagram and freight estimate within 24 hours.

How long from order to loading for CPCD25/CPCD30?
Standard units take 15-25 days after order confirmation. You get the schedule at four points: material preparation, assembly, testing and loading. OEM colors add 5-7 days on top of a 7-10 day sample. If you have a vessel cut-off, tell us the date and we will confirm whether it holds before you pay.
Will Toyota or Heli parts fit these forklifts?
Send the part numbers and we return a cross-reference within 24 hours. Common wear items and filters are covered. Where a part does not cross over, we say so rather than substituting.
What paperwork comes with the machine for EU customs?
CE and EPA certificates plus ISO 9001 are downloadable from our certification page. We also issue the declaration of conformity. If your broker needs a specific format, send the template and we will fill it.
Can I see the climbing and differential lock tests?
Yes. Gradeability curves for CPCD25 (58% loaded / 55% unloaded) and CPCD30 (52% loaded / 46% unloaded) are measured under standardized conditions. We also have video of the climb and of the differential lock engaging on loose ground — request either and we send the file.
What is the minimum order for a custom color or configuration?
Custom color starts at 3 units. Custom mast or attachment starts at 5 units, sampling 7-10 days. The quotation lists tooling costs separately if any apply, so you can see what is one-time and what is per unit.
How many units fit a container?
Two CPCD25 or CPCD30 units with standard mast fit a 40HQ. We send the loading diagram and a freight estimate for your port within 24 hours of getting the destination.
Next Step

Send Your Part Number or Model — Get Cross-Reference, Lead Time and Datasheet

One reply within 24 hours, with the documents attached.

Send Inquiry Back to Forklift
GUARANTEED RESPONSE
Reply Within 24 Hours
  • Compatibility check against your machine model
  • Unit price + MOQ + stock status
  • Lead time & worldwide shipping options
  • Datasheet, drawing & certificate package
Submit RFQ Now →