Wisdom WinGROUP CO., LIMITED
Get Quote
Home/ Forklift/ X Series 5.5-12 Ton Stone Special Vehicle
Forklift

X Series 5.5-12 Ton Stone Special Vehicle

5.5-12 Ton Stone Forklift for Marble & Granite Yards

X Series 5.5-12 Ton Stone Special Vehicle covers CPCD55, CPCD75, and CPCD120. These trucks are built for stone yards, marble slab handling, and quarry work. You get a Yuchai or Xinchai engine, reinforced mast, and high-strength drive axle. The 9° forward tilt angle helps the fork get under slabs faster than a standard 6° forklift.

  • Load chart verified at 3000 mm lift height
  • Choose Yuchai or Xinchai engine at order
  • Reinforced mast and axle with impact test data
  • CE/ISO certified, factory direct
Request a Quote View Specs
#369 · SKU
X Series 5.5-12 Ton Stone Special Vehicle
Why X Series

Built for Stone, Not Just Lifted

Reinforced mast, high-strength axle, and two engine choices

Load chart at 3000 mm lift height

5500 kg for CPCD55, 7500 kg for CPCD75, 12000 kg for CPCD120

Yuchai or Xinchai engine

pick based on local parts and service coverage

Reinforced

mast and high-strength axle with impact test data and 12-month structural warranty

9° Forward Tilt — Get Under Slabs Faster
Feature

9° Forward Tilt — Get Under Slabs Faster

See how the tilt angle changes cycle time in a stone yard

The 9° forward tilt lets the fork slide under slabs more easily and secure the load faster. In stone market work, this can cut cycle time by up to 15%. Comparison video available on request.

Where It Works
Feature

Where It Works

  • Marble slab yard loading and unloading
  • Granite block handling in quarry
  • Stone market warehouse logistics
  • Stone processing plant material transfer
  • Construction site heavy stone lifting
Engine Options

Yuchai or Xinchai — Choose by Local Service

Both engines reliable; pick based on parts availability in your region

Load chart at 3000 mm lift height

5500 kg for CPCD55, 7500 kg for CPCD75, 12000 kg for CPCD120

Yuchai or Xinchai engine

pick based on local parts and service coverage

Reinforced

mast and high-strength axle with impact test data and 12-month structural warranty

Model Matrix

CPCD55 / CPCD75 / CPCD120 Side by Side

Compare rated load, turning radius, speed, and gradeability

OUR OFFER

This Product

ParameterCPCD55CPCD75CPCD120
Rated load (kg)5500750012000
Load center (mm)500600600
Lifting height (mm)300030003000
Min. turning radius (mm)288034004200
Max travel speed (km/h)23/2529/3128/30
Max lifting speed (mm/s)530/560460/490390/420
Max gradeability (%)20/2026/2020/22

Generic Market Alternatives

  • Unknown material source & batch inconsistency
  • No compatibility verification for your machine model
  • Lead times stretch 3-8 weeks with no clear status updates
  • Weak or non-existent post-sales engineering support
Stone Yard Applications

Working in Marble, Granite, and Quarry Conditions

Real installations from our customers

X Series 5.5-12 Ton Stone Special Vehicle gallery
X Series 5.5-12 Ton Stone Special Vehicle gallery
Full Specifications

Technical Data for CPCD55/75/120

Download the spec sheet or request a customized configuration

Model
CPCD55 / CPCD75 / CPCD120
Rated load (kg)
5500 / 7500 / 12000
Load center distance (mm)
500 / 600 / 600
Standard lifting height (mm)
3000 / 3000 / 3000
Free lift height (mm)
165 / 160 / 90
Mast tilt angle (°)
6/6 / 6/6 / 6/6
Minimum turning radius (mm)
2880 / 3400 / 4200
Max travel speed loaded/unloaded (km/h)
23/25 / 29/31 / 28/30
Max lifting speed loaded/unloaded (mm/s)
530/560 / 460/490 / 390/420
Max gradeability loaded/unloaded (%)
20/20 / 26/20 / 20/22
Length without forks (mm)
3255 / 3810 / 4430
FAQ

Questions Stone Yard Buyers Ask

Load charts, engine choice, attachment compatibility, and spare parts

Can you provide a load chart at maximum lift height for CPCD55/75/120?
Yes. Each model has a load capacity curve showing rated load at 3000 mm lift height. CPCD55: 5500 kg at 500 mm load center. CPCD75: 7500 kg at 600 mm. CPCD120: 12000 kg at 600 mm. Ask us for the full load chart PDF.
What is the difference between Yuchai and Xinchai engine options?
Both work in stone yards. Yuchai gives higher torque for heavy loads and has wide service coverage in Southeast Asia, Africa, and South America. Xinchai uses less fuel and is well supported in China and the Middle East. We provide a regional service coverage map so you can choose based on local parts availability.
Does the 9° forward tilt angle really improve stone slab handling?
Yes. Standard forklifts tilt about 6°. The 9° tilt lets the fork slide under slabs more easily and secure the load faster. In stone market applications, this can cut cycle time by up to 15%. Comparison videos vs standard 6° forklifts are available on request.
Is the reinforced mast and axle tested for impact and abrasive stone environment?
Yes. We run drop impact tests and abrasive wear tests on the mast, carriage, and fork shaft. Test data and a 12-month warranty on structural components come with the machine. The high-strength drive axle is built for shock loads from uneven stone surfaces.
What attachments are compatible with CPCD55/75/120?
Stone grabs, slab clamps, fork positioners, and side shifters are compatible. We supply a full compatibility list with specifications. For OEM attachments, customization lead time is 30 days after drawing approval.
How fast can you deliver spare parts overseas?
We dispatch spare parts within 48 hours from our regional warehouses in Southeast Asia, the Middle East, and South America. Consumable parts like filters and brake pads are stocked for immediate shipment.
Next Step

Send Your Model or Part Number — Get Quote & Load Chart

Tell us the model, engine preference, and attachment needs

Send Inquiry Back to Forklift
GUARANTEED RESPONSE
Reply Within 24 Hours
  • Compatibility check against your machine model
  • Unit price + MOQ + stock status
  • Lead time & worldwide shipping options
  • Datasheet, drawing & certificate package
Submit RFQ Now →