Wisdom WinGROUP CO., LIMITED
Get Quote
Home/ Forklift/ Side Forklift 3.0-6.0 Tons
Forklift

Side Forklift 3.0-6.0 Tons

3.0-6.0 Ton Side Forklifts. 20% Faster Lifting and Travel. 18-20% Gradeability at Full Load.

This side forklift line covers three models: CCCD30-G72B at 3.0 tons, CCCD50-G76 at 5.0 tons, and CCCD60-G76 at 6.0 tons. All three run a medium-low speed, high-torque high-pressure common rail engine paired with a high-performance gearbox, giving 18-20% gradeability at full load.

The frame connects front and rear axles on the left side through a four-point support structure with double-nut anti-loosening; the right side uses a slider limit with adjustable clearance, so there is no impact during starting or braking. Heat management uses a plate-fin radiator, anti-backflow water tank mesh cover, and added vents on both sides of the engine hood. Lifting and travel speeds are raised, and the working cycle is about 20% shorter than the baseline.

Model mapping: 3.0T to CCCD30-G72B; 5.0T to CCCD50-G76; 6.0T to CCCD60-G76. Standard lead time is 25-35 days, confirmed against real stock at order. CE, EPA, and ISO certificates plus customs clearance documents are provided. OEM/ODM is supported: color, logo, attachment configuration, MOQ quoted per request. Technical replies within 48 hours, spare parts list included.

Request a Quote View Specs
#366 · SKU
Side Forklift 3.0-6.0 Tons
Model Matching

Pick the Right Model the First Time

3.0T = CCCD30-G72B | 5.0T = CCCD50-G76 | 6.0T = CCCD60-G76

Tonnage-to-model table

3.0T is CCCD30-G72B, 5.0T is CCCD50-G76, 6.0T is CCCD60-G76. Match capacity to model before you order.

Full-load gradeability is 18% on the 3T and 20% on the 5T and 6T

A test data comparison table is available on request.

High-pressure common rail engine runs at medium-low speed with high torque; plate-fin radiator, anti-backflow mesh cover, and hood side vents keep heat margin under continuous load

High-pressure common rail engine runs at medium-low speed with high torque; plate-fin radiator, anti-backflow mesh cover, and hood side vents keep heat margin under continuous load.

Performance Data

18-20% Gradeability at Full Load. 20% Faster Cycles.

High-pressure common rail engine plus high-performance gearbox delivers torque where the load is heaviest.

Tonnage-to-model table

3.0T is CCCD30-G72B, 5.0T is CCCD50-G76, 6.0T is CCCD60-G76. Match capacity to model before you order.

Full-load gradeability is 18% on the 3T and 20% on the 5T and 6T

A test data comparison table is available on request.

High-pressure common rail engine runs at medium-low speed with high torque; plate-fin radiator, anti-backflow mesh cover, and hood side vents keep heat margin under continuous load

High-pressure common rail engine runs at medium-low speed with high torque; plate-fin radiator, anti-backflow mesh cover, and hood side vents keep heat margin under continuous load.

Reliability

Four-Point Frame and Heat Margin for Continuous Shifts

Double-nut anti-loosening on the left, slider limit and adjustable clearance on the right. No impact on start or brake.

Tonnage-to-model table

3.0T is CCCD30-G72B, 5.0T is CCCD50-G76, 6.0T is CCCD60-G76. Match capacity to model before you order.

Full-load gradeability is 18% on the 3T and 20% on the 5T and 6T

A test data comparison table is available on request.

High-pressure common rail engine runs at medium-low speed with high torque; plate-fin radiator, anti-backflow mesh cover, and hood side vents keep heat margin under continuous load

High-pressure common rail engine runs at medium-low speed with high torque; plate-fin radiator, anti-backflow mesh cover, and hood side vents keep heat margin under continuous load.

Specifications

CCCD30-G72B vs CCCD50-G76 vs CCCD60-G76

Rated capacity 3000/5000/6000 kg; standard lift height 3600 mm; gradeability 18/20/20%.

OUR OFFER

This Product

ModelCCCD30-G72BCCCD50-G76CCCD60-G76
Rated capacity (kg)300050006000
Load center (mm)600600600
Lift height (mm)360036003600
Gradeability (%)182020
Lifting speed (mm/s)396380380

The full specification sheet includes free lift height, inner turning radius, and mast stationary height. Request the datasheet for the model you are comparing.

Generic Market Alternatives

  • Unknown material source & batch inconsistency
  • No compatibility verification for your machine model
  • Lead times stretch 3-8 weeks with no clear status updates
  • Weak or non-existent post-sales engineering support
Steel Pipe, Timber, Aluminum Extrusion
Feature

Steel Pipe, Timber, Aluminum Extrusion

Fork lengths and attachments matched to the load, not a one-size list.

Common setups we ship:

  • Steel pipe handling in warehouses and pipe yards
  • Timber yard loading and unloading
  • Aluminum extrusion handling
  • Container loading with the 3-ton CCCD30-G72B

Send the load length and weight and we mark the fork and attachment combination that fits.

Where It Works
Feature

Where It Works

  • Steel pipe handling in warehouses and pipe yards
  • Timber yard and lumber loading/unloading
  • Aluminum extrusion long-material handling
  • Container loading with the 3-ton CCCD30-G72B
  • Long material storage and retrieval in manufacturing plants
  • Construction material distribution centers
Certification and Support

CE/EPA/ISO Paperwork Ready for Import

Certificate list and clearance document package ship with the machine.

Model
CCCD30-G72B / CCCD50-G76 / CCCD60-G76
Rated lifting capacity (kg)
3000 / 5000 / 6000
Load center distance (mm)
600 / 600 / 600
Standard lifting height (mm)
3600 / 3600 / 3600
Free lift height (mm)
300 / 300 / 300
Inner turning radius (mm)
855 / 1087 / 1087
Max travel speed (full load/no load) km/h
20/21 / 24/25 / 24/25
Lifting speed (full load) mm/s
396 / 380 / 380
Gradeability (full load) %
18 / 20 / 20
Overall length (mm)
4260 / 4890 / 4890
Overall width (mm)
2040 / 2100 / 2100
Mast stationary height (mm)
2700 / 2865 / 2865
Engine type
High-pressure common rail, medium-low speed, high torque
Certification
CE / EPA / ISO
FAQ

Frequently Asked Questions

Model matching, stock and lead time, clearance documents, OEM/ODM, attachments, after-sales parts.

Which model do I need for 3, 5, or 6 tons?
3.0 ton is CCCD30-G72B, 5.0 ton is CCCD50-G76, and 6.0 ton is CCCD60-G76. The specification table lists all three side by side, so you can confirm capacity, lifting speed, and turning radius before sending your order.
How long is the lead time, and is stock available now?
Standard lead time is 25-35 days. Stock depends on model and attachment configuration. Send your target model number and we will confirm live stock and the exact ship date, not an estimate.
What documents come with the machine for customs clearance?
CE, EPA, and ISO certificates are available, and we supply a clearance document package covering the certificate list and import paperwork. Tell us your destination port and we will confirm what your broker needs.
Can you change color, add our logo, or fit different attachments?
Yes. OEM/ODM covers custom color, logo, and attachment configuration. MOQ depends on the change; we quote it together with the machine price so you see the full cost.
Which fork lengths and attachments fit steel pipe, timber, and aluminum extrusion?
We keep a compatibility list with recommended fork lengths and attachment options for each material type. Request it with your load dimensions and we will mark the matching configuration.
What happens after delivery if a part fails?
You get a spare parts list with the machine, and technical questions are answered within 48 hours. Spare parts can be ordered separately; we confirm part number and lead time before shipping.
Ready to Order?

Send Your Part Number. Get Stock and Lead Time Back.

Model, fork length, attachment. We reply within 24 hours with stock status, lead time confirmed against your build, and freight to your port.

Send Inquiry Back to Forklift
GUARANTEED RESPONSE
Reply Within 24 Hours
  • Compatibility check against your machine model
  • Unit price + MOQ + stock status
  • Lead time & worldwide shipping options
  • Datasheet, drawing & certificate package
Submit RFQ Now →