Wisdom WinGROUP CO., LIMITED
Get Quote
Home/ Forklift/ A Series 3.0-3.5 Ton Rental Special Forklift
Forklift

A Series 3.0-3.5 Ton Rental Special Forklift

Rental Forklifts That Leave the Yard Faster and Come Back Less Often.

The A Series 3.0-3.5 ton rental special forklift covers four models: CPC30, CPC35, CPCD30 and CPCD35. It was specified around what rental yards actually deal with — units going out and coming back all day, drivers who don't own the machine, and fuel tanks that sit unattended overnight.

  • Faster turnaround: single-rod and double-rod high-speed transmissions are fitted as standard, lifting travel speed by 10% and 30% respectively, so a unit clears the depot and reaches the job site sooner.
  • Built for repeat use: all exposed parts are metal, and the drive and steering axle housings are integrally cast rather than bolted assemblies.
  • Rental-yard security: lockable fuel cap as standard, plus key-switch one-touch power-off that cuts power in a single turn.
  • Fleet management: the four models share a large portion of replacement parts; a compatibility list is available for your workshop.
Request a Quote View Specs
#360 · SKU
A Series 3.0-3.5 Ton Rental Special Forklift
Speed

10% or 30% Faster — Fitted as Standard

Single-rod and double-rod high-speed transmissions

Single-rod transmission raises travel speed 10%, double-rod raises it 30%

both fitted as standard, no aftermarket kit needed.

Integrally cast drive and steering axle housings; every exposed part is metal, so bumpers and panels survive dock and yard contact

Integrally cast drive and steering axle housings; every exposed part is metal, so bumpers and panels survive dock and yard contact.

Lockable fuel cap standard on all four models

stops fuel draw-off and tampering between rentals.

Durability

Cast Axle Housings, Metal Where It Gets Hit

Why rental units fail early — and what we changed

Single-rod transmission raises travel speed 10%, double-rod raises it 30%

both fitted as standard, no aftermarket kit needed.

Integrally cast drive and steering axle housings; every exposed part is metal, so bumpers and panels survive dock and yard contact

Integrally cast drive and steering axle housings; every exposed part is metal, so bumpers and panels survive dock and yard contact.

Lockable fuel cap standard on all four models

stops fuel draw-off and tampering between rentals.

Security

Lockable Fuel Cap and One-Touch Power-Off

Two features rental operators ask for first

Single-rod transmission raises travel speed 10%, double-rod raises it 30%

both fitted as standard, no aftermarket kit needed.

Integrally cast drive and steering axle housings; every exposed part is metal, so bumpers and panels survive dock and yard contact

Integrally cast drive and steering axle housings; every exposed part is metal, so bumpers and panels survive dock and yard contact.

Lockable fuel cap standard on all four models

stops fuel draw-off and tampering between rentals.

Model Comparison

CPC30 vs CPC35 vs CPCD30 vs CPCD35

Capacity is the easy part — check turning radius and gradeability

OUR OFFER

This Product

ModelRated CapacityMin. Turning RadiusGradeabilityTransmission
CPC303000 kg2500 mm20%Single-rod / double-rod
CPC353500 kg2525 mm15% / 20%Single-rod / double-rod
CPCD303000 kg2400 mm20%Single-rod / double-rod
CPCD353500 kg2420 mm15% / 20%Single-rod / double-rod

Note the turning radius: the CPCD30 and CPCD35 turn in 2400 and 2420 mm, roughly 100 mm tighter than the CPC variants — enough to matter in a crowded warehouse aisle. Parts commonality across all four models is high; we send the compatible replacement parts list with every fleet quote.

Generic Market Alternatives

  • Unknown material source & batch inconsistency
  • No compatibility verification for your machine model
  • Lead times stretch 3-8 weeks with no clear status updates
  • Weak or non-existent post-sales engineering support
Yards, Sites and Warehouses — Not Showrooms
Feature

Yards, Sites and Warehouses — Not Showrooms

What these units are specified for

Typical deployment is a hire fleet running daily and weekly contracts: pallet movement in logistics warehouses, material handling on construction sites with unpaved ground, and short-term cover when a customer's own machine is down. The 500 mm load centre and 3000 mm standard lift height cover most of that work; where aisles are tight, take the CPCD30 or CPCD35 for the smaller turning circle.

Where It Works
Feature

Where It Works

  • Short-term rental fleets, daily and weekly hire
  • Logistics and warehousing yards running multiple shifts
  • Construction sites with unpaved ground and dock transfers
  • Fleet operators standardising on 3.0-3.5 ton diesel units
  • OEM/ODM fleets with custom livery and spec requirements
Specifications

Technical Specifications

Full parameters for CPC30 / CPC35 / CPCD30 / CPCD35

Model
CPC30 / CPC35 / CPCD30 / CPCD35
Rated capacity (kg)
3000 / 3500
Load center distance (mm)
500
Standard lift height (mm)
3000
Free lift height (mm)
145 / 150
Mast tilt angle (°)
6/12
Minimum turning radius (mm)
2500 (CPC30) / 2525 (CPC35) / 2400 (CPCD30) / 2420 (CPCD35)
Maximum travel speed (km/h), loaded/unloaded
21/22 (single-rod) / 25/26 (double-rod)
Lift speed (mm/s), loaded/unloaded
160/490 (CPC30) / 400/420 (CPC35) / 460/490 (CPCD30) / 380/… (CPCD35)
Maximum gradeability (%)
20/20 (CPC30, CPCD30) / 15/20 (CPC35, CPCD35)
Next Step

Send Your Model Mix — Get Stock Status and a Dispatch Date

Reply within 24 hours

Send Inquiry Back to Forklift
GUARANTEED RESPONSE
Reply Within 24 Hours
  • Compatibility check against your machine model
  • Unit price + MOQ + stock status
  • Lead time & worldwide shipping options
  • Datasheet, drawing & certificate package
Submit RFQ Now →
FAQ

Questions Rental Fleets Ask Us

Lead time, MOQ, parts and certification

How fast can you ship a bulk rental fleet order?
Dispatch date depends on model mix and quantity. Send us the model list and unit count and we will confirm against current stock — if the units are in stock we quote the actual loading date in writing; if not, we give you the production slot. We do not quote a lead time before checking stock.
What is the MOQ if we want our own livery and spec?
MOQ varies by what you change — decals and paint are low-threshold, while mast or transmission changes need a larger run. Tell us which items you want customised and we will come back with the MOQ and unit price for that specific configuration.
Do CPC30, CPC35, CPCD30 and CPCD35 share parts?
A large share of service parts is common across the four models, which is the point of running them as one fleet. We issue a compatible replacement parts list with the order so your workshop can stock one set of filters, brake components and seals instead of four.
What certification comes with the units?
CE and ISO documentation is supplied as standard. The lockable fuel cap and key-switch power-off are part of the standard build, and the certification file is issued with the shipping documents for your procurement records.
Can you back up the 10%-30% speed claim with data?
Yes. The 10% figure applies to the single-rod transmission and 30% to the double-rod, measured against the standard-speed baseline. We send the comparison table and performance curve with the datasheet so your team can check it against your own site cycle times.
What support do we get after the fleet is delivered?
Spare parts supply is guaranteed under the fleet agreement, and we provide maintenance guidance for your workshop team. For rental operators running units across several depots, we can also advise on a common parts stock level based on your fleet size.